Renovation Cost Per Square Foot in Singapore
Condos are often quoted per square foot, while HDB flats are quoted as a total. Here is what the psf numbers mean, what they leave out, and how to use them.

Ask what a renovation costs and you will hear two kinds of answer: a total for the flat, or a rate per square foot. The renovation cost per sqft is a useful yardstick for condos and offices, but it hides as much as it shows. This guide explains when psf pricing makes sense, the ranges quoted in 2026, and how to compare quotes fairly.
Ranges are those published by Singapore renovation guides in 2026 and vary by scope and finishes. Treat them as a sense-check, not a quote.
Why condos are quoted per square foot
Condo works are usually priced per square foot of floor area. Published 2026 ranges include:
| Scope | Typical range |
|---|---|
| Cosmetic refresh, minimal hacking | From about S$40 psf |
| Full renovation | About S$50 to S$120 psf |
| High specification (stone, feature joinery, smart home) | From about S$150 psf |
A 900 sq ft condo at S$50 to S$120 psf therefore lands between about S$45,000 and S$108,000. Our condo renovation guide covers what drives the spread.
Why HDB flats are quoted as a total
HDB renovation is usually quoted as a package for the whole flat, because the scope is similar from flat to flat and the large items are fixed: a kitchen, one or two bathrooms, flooring and carpentry. A new 4-room BTO is commonly quoted around S$40,000 to S$55,000. Dividing that by floor area gives a psf figure, but a small flat with the same two bathrooms will show a higher number than a large one.
What renovation cost per sqft leaves out
A single rate can hide big differences, so treat renovation cost per sqft as a starting point and not an answer:
- Carpentry. A flat with floor-to-ceiling wardrobes and a feature wall costs far more per square foot than one with a simple layout.
- Wet areas. Kitchens and bathrooms cost more per square foot than any other room, so a flat with more of them pushes the average up.
- Hacking and rebuild. Resale homes need demolition and rebuilding that a new flat does not.
- What is excluded. Furniture, appliances and curtains are usually outside the rate.
How to use psf figures properly
- Compare like with like. Only compare a psf rate with another that covers the same scope.
- Convert to a total. Multiply the rate by your area and check the result against the renovation cost calculator.
- Ask what the rate includes. Get the inclusions in writing, and compare against an itemised quotation. See how to read a renovation quotation.
- Check unit rates, not just totals. For flooring, tiling and painting, per-square-foot unit rates are meaningful. The itemised estimator shows typical 2026 unit rates for each.
Where per-square-foot pricing is reliable
Some trades are genuinely priced per square foot: vinyl flooring, floor tiling, painting by area, and false ceilings. For these, comparing psf quotes between firms is fair as long as the specification matches. Carpentry is priced per foot run instead, which is a length along the wall and not an area.
Frequently asked questions
What is the average renovation cost per square foot in Singapore?
For condos, full renovation is commonly quoted between about S$50 and S$120 psf in 2026, with cosmetic work starting lower and high-specification work much higher.
Why is my psf quote higher than a friend's?
Scope, carpentry, the number of wet areas and the specification all change the rate. A rate only makes sense next to the scope it covers.
Is psf pricing used for HDB?
Mostly for individual trades such as flooring and painting. Whole-flat HDB work is normally quoted as a package or an itemised total.
Does the rate include design fees?
Not always. Ask whether design, project management and supervision are included. Our guide to interior designer fees explains the common models.
renovation cost per sqftpsfcondohdb
Ready to find a designer?
Compare Singapore interior designers and renovation firms, then get matched for free.