HDB Flooring Cost in Singapore by Material
Flooring is priced per square foot, so it is one of the easiest costs to estimate. Here are 2026 ranges by material and a worked example for a 4-room flat.

Flooring is one of the few renovation costs you can estimate yourself, because it is priced per square foot. This guide sets out the HDB flooring cost for each common material in 2026, what is and is not included in the rate, and a worked example for a 4-room flat.
Ranges are those published by Singapore flooring contractors and cost guides in 2026. Rates vary by product, area and site condition, so always get a written quote.
HDB flooring cost by material
| Material | Typical range per sq ft |
|---|---|
| Vinyl (SPC), supplied and installed | About S$4.50 to S$9 |
| Floor tile overlay on existing tiles | About S$3 to S$9 |
| New floor tiles laid after hacking | About S$6 to S$12 |
| Hacking old floor tiles | About S$4.50 to S$6.50 |
Vinyl at the lower end is typically a basic click-lock product, while thicker or premium products sit near the top. Our guide to flooring options compares how each material looks and wears.
What the rate usually includes
Ask your contractor to confirm each of these, because they change the real cost:
- Skirting around the edges of each room
- Underlay or levelling where the existing floor is uneven
- Edge trims at doorways and where floors meet
- Delivery and disposal of packaging and old material
If new tiles replace old ones, remember to add hacking and the disposal of debris.
Worked example: 4-room flat
A 4-room HDB typically has roughly 550 to 650 square feet of floor to cover, once you exclude bathrooms and kitchen if those are tiled separately. At a mid-range vinyl rate of about S$5.50 to S$8.50 per square foot, flooring comes to roughly S$3,300 to S$5,850 including installation, skirting and basic preparation. New tiles would cost more once hacking and rebuilding are added.
You can try your own numbers in our itemised cost estimator, or work out your floor area first in the room planner.
Overlay or hack?
Overlaying vinyl or new tiles on existing tiles avoids the cost and mess of hacking, and it keeps the floor level lower. It works when the existing tiles are flat and firmly bonded. Hollow or loose tiles need fixing first. Hacking suits a full resale rebuild where you want new waterproofing and a new screed. Our guide to renovating a resale HDB explains when it is worth it.
Rules to check
Whatever you choose, the final HDB flooring cost also depends on timing: vinyl can go in late, after carpentry and painting, while tiles go in early. Plan the sequence with your contractor so floors are not damaged by later trades.
HDB has rules on flooring in wet areas and on what you can remove, and condos have their own rules about floor finishes and underlay. Read the HDB renovation permit and rules guide before you decide.
How to compare flooring quotes
- Ask for the price per square foot and the total area measured.
- Check the product brand, thickness and warranty.
- Confirm skirting, trims, levelling and disposal.
- Compare the same product, not just the same price.
Frequently asked questions
What is the cheapest flooring for an HDB?
Basic click-lock vinyl over sound existing tiles is usually the lowest-cost option because it avoids hacking.
Is vinyl or tile cheaper?
Vinyl is generally cheaper to supply and install, and far cheaper if you skip hacking. New tiles cost more once hacking and rebuilding are included.
Can I install flooring myself?
Click-lock vinyl can be installed by confident DIYers, but preparation and trims matter. For tiles, use a professional.
How long does flooring take?
Vinyl over a prepared floor is often a day or two for a flat, while hacking and retiling takes much longer.
flooringvinyltilestimberhdbcost
Ready to find a designer?
Compare Singapore interior designers and renovation firms, then get matched for free.