Costs & Budgeting

BTO vs Resale Renovation Cost: Why Resale Costs More

A resale flat usually costs more to renovate than a new BTO. Here are estimator totals for each flat size, the works that explain the gap, and how to budget for both.

A new BTO comes with floors, walls and fittings that mostly need decoration, while a resale flat often needs old finishes removed and replaced. That difference is the main reason for the BTO vs resale renovation cost gap. This guide shows what the Layered estimator produces for each flat size and what explains the difference.

Totals below come from the starting quantities in Layered's itemised estimator, using 2026 unit rates, before GST and before contingency. They are our assumptions for a common scope, not quotes. Edit the quantities on the page for your own flat.

Estimator totals for BTO and resale

FlatNew BTO (starting scope)Resale (starting scope)
3-roomAbout S$19,000 to S$35,000About S$32,000 to S$59,000
4-roomAbout S$25,000 to S$46,000About S$38,000 to S$70,000
5-roomAbout S$29,000 to S$54,000About S$43,000 to S$79,000

On these starting scopes, a resale flat comes out roughly S$13,000 to S$25,000 higher than a BTO of the same size. The ranges are wide because the unit rates are wide. Your quotes will land at different points depending on the finish and the firm.

Why the BTO vs resale renovation cost gap exists

The gap comes from a handful of items that a new BTO does not need:

  • Hacking and disposal: removing old floor tiles and debris, which is a separate line. See our HDB hacking cost guide.
  • Bathrooms: old bathrooms often need hacking, waterproofing, new tiles and new fittings. Our HDB bathroom renovation cost guide shows the line items.
  • Rewiring: older flats may need the electrical system updated.
  • Doors: bedroom and main doors may need replacing.
  • Kitchen wall tiling: old tiles are often replaced.

What a BTO still costs

A BTO is a clean slate, but the new owner often adds carpentry, flooring, ceilings, lighting, painting and a gate. Carpentry is typically the largest line. Our BTO renovation cost guide covers the main items.

Budget for the unknowns in resale

Resale flats hold surprises behind old finishes, such as hidden leaks, damaged waterproofing or old wiring. Keep a larger buffer than for a BTO. Our guide to renovation contingency explains how much to hold back, and the estimator suggests 10% to 15%.

How to compare the two for your decision

If you are choosing between buying a resale flat and waiting for a BTO, add the likely renovation cost to the purchase price, not just the price on the listing. A cheaper resale flat in poor condition can cost more overall than a dearer one in good condition. View the flat with a contractor or designer if possible, and ask for an itemised quote before you commit.

Plan before you quote

Use the renovation cost calculator for a quick range, then the itemised estimator to adjust quantities, and the room planner to measure carpentry runs. Take that brief to two or three firms and compare their quotes on the same scope.

Frequently asked questions

Is resale always more expensive to renovate than BTO?

Usually, because of hacking, bathrooms and replacement work. A recently renovated resale flat in good condition can cost less than the estimator's starting scope suggests.

How much more does it cost to renovate a resale flat?

On the estimator's starting scopes, roughly S$13,000 to S$25,000 more than a BTO of the same size. Your own difference depends on the condition of the flat.

Should I keep a bigger buffer for resale?

Yes. Hidden problems appear once old finishes come off, so a buffer at the upper end of 10% to 15% is sensible.

Do these totals include GST?

No. They are before GST and contingency. Add 9% GST if your contractor is GST-registered.

bto vs resale renovation costbtoresale hdbbudget

Ready to find a designer?

Compare Singapore interior designers and renovation firms, then get matched for free.

HDB designers Condo designers Renovation checklist